Name: 26th ESLS RF Workshop
Start: 2023-11-08T08:30:00+01:00
End: 2023-11-09T16:30:00+01:00
Location: Savoia Excelsior Palace, Trieste, Italy

26th ESLS RF Workshop

from Wednesday, November 8, 2023 (8:30 AM) to Thursday, November 9, 2023 (4:30 PM)

Monday, November 6, 2023
Tuesday, November 7, 2023
Wednesday, November 8, 2023

8:30 AM Registration
Registration
8:30 AM - 9:00 AM
Room: Sala Imperatore
9:00 AM Welcoming Address - Alfonso Franciosi
Welcoming Address (26th ESLS RF Workshop)
- Alfonso Franciosi
9:00 AM - 9:10 AM
Room: Sala Imperatore
9:10 AM General Informations for the Workshop - Cristina Pasotti
General Informations for the Workshop (26th ESLS RF Workshop)
- Cristina Pasotti
9:10 AM - 9:30 AM
Room: Sala Imperatore
9:30 AM Elettra 2.0 project - Emanuel Karantzoulis
Elettra 2.0 project (26th ESLS RF Workshop)
- Emanuel Karantzoulis
9:30 AM - 10:00 AM
Room: Sala Imperatore
10:00 AM Status of the ESRF-EBS 352 MHz RF system - Jörn Jacob (ESRF)
Status of the ESRF-EBS 352 MHz RF system (26th ESLS RF Workshop)
- Jörn Jacob (ESRF)
10:00 AM - 10:20 AM
Room: Sala Imperatore The first high energy 4th generation low emittance ring, the Extremely Brilliant Source EBS, is in user operation since August 2020. The existing SSA and klystron transmitters where kept to power the 13 new mono-cell HOM damped EBS cavities. Ten new 110 kW SSAs have recently been ordered from JEMA-France to replace the more than 30 years old klystron transmitters until end 2026 and the site preparation for their installation is in good progress. The design of normal conducting 4th harmonic RF cavities has also evolved and is now close to being finalized. The implementation of an active 4th harmonic RF system at the ESRF is scheduled after completion of the 352 MHz SSA project.
10:20 AM Operation and Upgrade of the SLS RF Systems - Lukas Stingelin (Paul Scherrer institut)
Operation and Upgrade of the SLS RF Systems (26th ESLS RF Workshop)
- Lukas Stingelin (Paul Scherrer institut)
10:20 AM - 10:40 AM
Room: Sala Imperatore On 30th of September, “dark-time” started for the SLS 2.0 upgrade. Unfortunately, the machine availability of the last year was one of the worst since start of SLS operation. Several outages were caused by water-leaks and by the cryo-system of the Super-3HC. Disassembly of the SLS RF-systems started while procurement of the new components for SLS 2.0 reaches in its final phase. Testing and power conditioning of the first new 500MHz cavity was done and achieved up to 600kVcw in the test-stand.
10:40 AM Coffee break
Coffee break
10:40 AM - 11:00 AM
11:00 AM RF Technology for SOLEIL II - Lu zhao (Synchrotron SOLEIL)
RF Technology for SOLEIL II (26th ESLS RF Workshop)
- Lu zhao (Synchrotron SOLEIL)
11:00 AM - 11:20 AM
Room: Sala Imperatore SOLEIL II is currently advancing through the conceptual design phase. Within the realm of radio frequency (RF) activities, our focus has been on enhancing the High-Power RF Solid-State Amplifier, aiming to boost reliability and minimize energy consumption. To achieve this, we've successfully fabricated and tested a prototype of the amplifier at SOLEIL/Booster. In addition, we've developed and tested a compact Digital Low-Level RF (LLRF) system. Furthermore, our research extends to the impedance analysis of a 4th-order Normal Conductive (NC) passive cavity, similar in type to the ESRF design. This investigation promises to contribute valuable insights to our ongoing work.
11:20 AM PETRA IV activities @ DESY - Rüdiger Onken (DESY - MHFe)
PETRA IV activities @ DESY (26th ESLS RF Workshop)
- Rüdiger Onken (DESY - MHFe)
11:20 AM - 11:40 AM
Room: Sala Imperatore PETRA III is to be upgraded to a next-generation synchrotron radiation source (PETRA IV). In addition to extensive infrastructure construction activities, the RF systems will also be rebuilt in a new RF building. The booster (DESY II) will as well be rebuilt in the old DESY synchrotron tunnel. This means that we will say goodbye to klystrons and the majority of multicell cavities and switch to semiconductor amplifiers and HOM-damped cavities. In addition to the 500 MHz fundamental system, a third harmonic system will also be needed. This is a report about the construction activities, experiences with a 500 MHz prototype system (SSA, HOM-damped cavity as well as LLRF system).
11:40 AM Status Report BESSY+MLS - Bernhard Schriefer (Helmholtz Zentrum Berlin)
Status Report BESSY+MLS (26th ESLS RF Workshop)
- Bernhard Schriefer (Helmholtz Zentrum Berlin)
11:40 AM - 12:00 PM
Room: Sala Imperatore - Metrology Light Source (MLS): Migration from IOT to SSA (Cryoelectra) - Cyberattack on HZB in June 2023 - 1.5 GHz Cavities and SSA Transmitters
12:00 PM Status and developments of the ALBA RF system - Pol Solans (ALBA Synchrotron)
Status and developments of the ALBA RF system (26th ESLS RF Workshop)
- Pol Solans (ALBA Synchrotron)
12:00 PM - 12:20 PM
Room: Sala Imperatore ALBA is a 3rd generation synchrotron light source located in Barcelona, Spain and in operation since 2012. The storage ring RF system consists of six HOM-damped normal conducting cavities, fed with IOT based transmitters able to deliver up to 160 kW each. The booster counts with one 5-cell PETRA type cavity fed with a SSPA delivering up to 50 kW. This presentation aims to summarize the experience and statistics of the operation since the last RF meeting and also to present the developments done in the framework of the accelerator upgrade project to ALBA-II, including the active 3rd harmonic cavity commissioning.
12:20 PM Group photo
Group photo
12:20 PM - 12:30 PM
Room: Sala Imperatore

12:30 PM Lunch break
Lunch break
12:30 PM - 1:50 PM
Room: Sala Imperatore
1:50 PM Studies on transient beam loading generated by the superconductive harmonic cavity - Marco Lonza (Elettra Sincrotrone Trieste)
Studies on transient beam loading generated by the superconductive harmonic cavity (26th ESLS RF Workshop)
- Marco Lonza (Elettra Sincrotrone Trieste)
1:50 PM - 2:10 PM
Room: Sala Imperatore A simulator of longitudinal dynamics based on an analytical frequency domain model was developed to evaluate the transient beam loading in the Elettra 2.0 storage ring. Experiments have been carried out in the present Elettra machine to characterize the harmonic cavity and to compare the simulator with the real machine.
2:15 PM Tour of Trieste
Tour of Trieste
2:15 PM - 4:00 PM

4:00 PM Coffee break
Coffee break
4:00 PM - 4:30 PM
Room: Sala Imperatore
4:30 PM Compact linear accelerator FLUTE: status update - Anton Malygin (Karlsruhe Institute of Technology)
Compact linear accelerator FLUTE: status update (26th ESLS RF Workshop)
- Anton Malygin (Karlsruhe Institute of Technology)
4:30 PM - 4:50 PM
Room: Sala Imperatore FLUTE (Ferninfrarot Linac- Und Test-Experiment) at KIT, developed and operated by KIT-IBPT, serves as an accelerator test facility for a variety of accelerator studies, delivering coherent radiation in the form of ultra-short, very intense light pulses spanning the terahertz and far-infrared spectral range and beyond. It will also serve as an injector for a compact Very Large Acceptance Storage Ring (VLA-cSR) being realised at KIT as part of the cSTART (compact STorage Ring for Accelerator Research and Technology) project. In order to achieve the acceleration of electrons in the RF photoinjector and linac with high stability, an upgrade of the RF system has been carried out, which provides more stable RF performance than before. This paper reports on the design and commissioning status of the RF system including the new RF photoinjector.
4:50 PM Overview and Status of the ASTRID2 RF systems - Jørgen S. Nielsen (Aarhus University, Department of Physics and Astronomy, ISA)
Overview and Status of the ASTRID2 RF systems (26th ESLS RF Workshop)
- Jørgen S. Nielsen (Aarhus University, Department of Physics and Astronomy, ISA)
4:50 PM - 5:10 PM
Room: Sala Imperatore An overview and a status of the RF systems used at the ASTRID2 facility will be presented, including the new 3 GHz RF system for our Microtron. The talk will also include a report on our on-going efforts on improving the ASTRID2 beam stability and lifetime by optimizing the 3rd harmonic Landau cavity temperature and detuning.
7:30 PM Dinner
Dinner
7:30 PM - 10:30 PM
Thursday, November 9, 2023
9:00 AM FERMI: present status and future upgrades - Giuseppe Penco
FERMI: present status and future upgrades (26th ESLS RF Workshop)
- Giuseppe Penco
9:00 AM - 9:20 AM
Room: Sala Imperatore
9:20 AM Fabrication, Conditioning and Installation of the 1st S-band High Gradient Module for the Energy Upgrade of the FERMI Free Electron Laser Linac - Nuaman Shafqat (Elettra Sincrotrone, Trieste, Italy)
Fabrication, Conditioning and Installation of the 1st S-band High Gradient Module for the Energy Upgrade of the FERMI Free Electron Laser Linac (26th ESLS RF Workshop)
- Nuaman Shafqat (Elettra Sincrotrone, Trieste, Italy)
9:20 AM - 9:40 AM
Room: Sala Imperatore FERMI is the seeded free electron laser (FEL) user facility at Elettra laboratory in Trieste, operating in the VUV to soft X-rays spectral range. In order to extend the FEL spectral range to shorter wavelengths, an increase in the linear accelerator (linac) energy from 1.5 GeV to 2.0 GeV is required. This result will be achieved by replacing the present old sections with the newly designed accelerating sections which can work at high gradient with lower transverse wakefields. After the successful testing of a short prototype, 354 mm in length, of a new high-gradient (HG) section that sustained an accelerating gradient of 40 MV/m with a breakdown rate (BDR) of 8X10-8 bpp, two 3.0 m HG structures with the same design were built and installed at the FERMI linac. We report here the recent experience on the conditioning and installation of the first high gradient sections and the operation of the spherical pulse compressor prototype, conditioned up to 100 MW output power with a power amplification factor of 3.5.
9:40 AM Development of a Single Mode Cavity for the Third Harmonic RF-System of PETRA IV - Peter Hülsmann (DESY)
Development of a Single Mode Cavity for the Third Harmonic RF-System of PETRA IV (26th ESLS RF Workshop)
- Peter Hülsmann (DESY)
9:40 AM - 10:00 AM
Room: Sala Imperatore PETRA IV will use the BESSY HOM damped cavities for the fundamental 500 MHz RF system. In order to reduce the negative effects of Touschek and intrabeam scattering on the lifetime and emittance of the electron bunches, third harmonic cavities will be installed. They elongate the bunches and thus reduce their charge density. One possible candidate for a third harmonic cavity is the 1.5 GHz ALBA HOM damped cavity which is mainly a 500 MHz HOM damped BESSY cavity scaled down by a factor of three. This cavity has, in active operation at BESSYII, successfully extended bunches at low beam currents. The resonator is expensive to build due to its complexity and the many independent cooling water circuits. The many independent cooling water circuits require complex water manifolds with all necessary flow and pressure meters. In PETRA IV, 24 of these cavities are required. Therefore, it is reasonable to look for an alternative cavity design. It should: • Have a simple cavity design that is easy to fabricate. • Have few cooling circuits. • Have a higher HOM damping efficiency compared to the ALBA cavity. • Have an adjustable coupling factor from zero to five. An interesting candidate among the few single-mode structures is the "Shintake cavity", named after its inventor. We have optimized the cavity design and have worked out the permissible mechanical tolerances to fulfill the electrical requirements using CST Microwave Studio. Results and are presented.
10:00 AM Diamond RF System - Present Status and DII Upgrade - Peter Marten (Diamond Light Source Ltd.)
Diamond RF System - Present Status and DII Upgrade (26th ESLS RF Workshop)
- Peter Marten (Diamond Light Source Ltd.)
10:00 AM - 10:20 AM
Room: Sala Imperatore A look at the Present Diamond RF system, status and faults followed by a brief look at the DII upgrade.
10:20 AM Coffee break
Coffee break
10:20 AM - 10:50 AM
Room: Sala Imperatore
10:50 AM HOM Dampers Design for the MAX IV 100 MHz RF Cavities - Henrique O. Caiafa Duarte (MAX IV Laboratory)
HOM Dampers Design for the MAX IV 100 MHz RF Cavities (26th ESLS RF Workshop)
- Henrique O. Caiafa Duarte (MAX IV Laboratory)
10:50 AM - 11:10 AM
Room: Sala Imperatore This presentation describes the electromagnetic, thermal and mechanical design and RF characterization for the prototype HOM dampers for the MAX IV 100 MHz RF cavities. The dampers are of antenna type and aim to reduce the shunt impedance of all modes to below ~3 kOhms while keeping one of the modes basically unaffected in both frequency and quality factor so that it can be effectively dealt with by means of temperature tuning. The analysis shows it is important to consider the effect on the HOM damper efficiency of the characteristics of the transmission that connects the cavity to the high power circulator located between the RF transmitter and the cavity.
11:10 AM Cavity fixing and RF power conditioning - Akira Mochihashi (Karlsruhe Institute of Technology)
Cavity fixing and RF power conditioning (26th ESLS RF Workshop)
- Akira Mochihashi (Karlsruhe Institute of Technology)
11:10 AM - 11:30 AM
Room: Sala Imperatore
11:30 AM Upgrades of RF amplifiers towards Elettra 2.0 - Alessandro Cuttin (Elettra Sincrotrone Trieste)
Upgrades of RF amplifiers towards Elettra 2.0 (26th ESLS RF Workshop)
- Alessandro Cuttin (Elettra Sincrotrone Trieste)
11:30 AM - 11:50 AM
Room: Sala Imperatore The end of the project *Solid State at Elettra (SSatE)* marked the completion of the transition from the original RF klystron and IOT amplifiers to cutting-edge solid-state ones, and represents a significant milestone towards Elettra 2.0. The new amplifiers deliver up to 130 kW to the RF cavity, improving the beam quality while, at the same time, ensuring efficiency, robustness and redundancy.
11:50 AM Closing remarks - Cristina Pasotti (Elettra-Sincrotrone Trieste S.C.p.A.)
Closing remarks (26th ESLS RF Workshop)
- Cristina Pasotti (Elettra-Sincrotrone Trieste S.C.p.A.)
11:50 AM - 12:00 PM
Room: Sala Imperatore
12:00 PM Lunch break
Lunch break
12:00 PM - 1:30 PM
Room: Sala Imperatore

1:30 PM Transfer to Elettra Sincrotrone Trieste
Transfer to Elettra Sincrotrone Trieste
1:30 PM - 2:00 PM

2:00 PM Registration
Registration
2:00 PM - 2:15 PM

2:15 PM Elettra and FERMI tour
Elettra and FERMI tour
2:15 PM - 3:30 PM

4:00 PM End of Workshop and farewell
End of Workshop and farewell
4:00 PM - 4:10 PM